source: ChangeLog @ f2e36b5

barnowl_perlaimdebianowlrelease-1.4release-1.5release-1.6release-1.7release-1.8release-1.9
Last change on this file since f2e36b5 was f2e36b5, checked in by Erik Nygren <nygren@mit.edu>, 19 years ago
* Page-down will not skip past the last message if its truncated. * Added C-t binding for transposing characters. (from jdaniel)
  • Property mode set to 100644
File size: 22.3 KB
Line 
1$Id$
2
31.2.1-pre-4
4        Page-down will not skip past the last message if its truncated.
5        Added C-t binding for transposing characters.  (from jdaniel)
6       
71.2.1-pre-3
8        Variables now have a summary and a long description.
9                Only the summary is shown with help.
10                The long description is shown with "show variable foo".
11        Fix the scrolling bug where we would sometimes fail to scroll
12             the screen down, leaving the current message off
13             the bottom of the screen.
14        Added a 'scrollmode' variable which determines how the screen
15             will scroll as the cursor moves.  The default behaves
16             identically to previous versions of owl.
17             The following modes are supported:
18             normal      - This is the owl default.  Scrolling happens
19                           when it needs to, and an attempt is made to
20                           keep the current message roughly near
21                           the middle of the screen.  (default)
22             top         - The current message will always be the
23                           the top message displayed.
24             neartop     - The current message will be one down
25                           from the top message displayed,
26                           where possible.
27             center      - An attempt is made to keep the current
28                           message near the center of the screen.
29             paged       - The top message displayed only changes
30                           when user moves the cursor to the top
31                           or bottom of the screen.  When it moves,
32                           the screen will be paged up or down and
33                           the cursor will be near the top or
34                           the bottom.
35             pagedcenter - The top message displayed only changes
36                           when user moves the cursor to the top
37                           or bottom of the screen.  When it moves,
38                           the screen will be paged up or down and
39                           the cursor will be near the center.
40
411.2.1-pre-2
42        Refixed 'login or login' typo in help
43        Fixed M-u description
44        Removed 'first' and 'last' from basic command help
45        Added M-N to basic key help
46        Added M-D, M-u to basic key help
47        Fixed a quoting problem in configure.in
48        Changed top of help to use 'show' instead of M-x
49        Fixed a bug in the summary field for user-created aliases
50        Added "reply zaway" which sends a zaway response to the current msg.
51        Added "edit:delete-prev-word" command and bound M-BACKSPACE to it.
52        Added owl_sprintf which returns the formatted string, or NULL.
53                The caller must free this string.
54                This will allocate enough memory and thus
55                avoid potential some buffer overrun situations.
56        Started fixing some potential buffer overrun situations.
57        Simple implementation of 'zwrite -m' (doesn't yet log an outgoing
58                message as having been sent.)
59        The "Not logged in or subscribing to messages" error
60                now includes the name of the recipient.
61        The "disable-ctrl-d" variable may also be set to "middle"
62                which will result in ctrl-d only sending at the
63                end of the message.  This is now the default.
64                This also added a command "editmulti:done-or-delete".
65        Fixed a bug in the "reply -e" command.
66        Always clear the command buffer before executing the command.
67                (So that interactive commands can sanely do start-command.)
68        Fixed preservation of e->dotsend across owl_editwin_clear().
69        Added history for multiline edit windows (eg, for zephyr composition).
70                The M-n and M-p keys will cycle through the history ring.
71                In particular, it is now possible to edit the command line
72                of a zephyr being composed:  C-c it and restart it
73                and then M-p to get the aborted composition back.
74        Added owl::send_zwrite(command, message) to the perl glue
75                to allow for the direct sending of multi-line messages.
76                For example:  owl::send_zwrite("-c foo -i bar", "hello");
77        Reverted attempted fix for the pagedown problem
78                which just made things worse.
79        Changed owl_fmtext_print_plain to return an alloc'd string to
80                avoid buffer overrun risks.
81        Added owl::ztext_stylestrip("...") function to perlglue
82                 which returns the ztext with formatting stripped out.
83        Added colorztext variable which can be used to disable @color()
84                 strings arriving in messages after it is set.
85                 (Currently, changing its value won't reformat messages).
86        Outgoing zephyr logging now obeys the logpath variable.
87        The '~' character in logpath and classlogpath now gets
88                 replaced with the user's home directory.
89        Added simple implementation of smartnarrow-to-admin that
90                 creates a "type-admin" autofilter.
91                 This was done mostly so that M-C-n and M-C-p do something
92                 sane on admin messages.
93        Added opera to the allowed options to the webbrowser variable.
94        Fixed some buffer overruns in the "reply" command.
95        When repying to "all" on a message that begins with "CC:" (eg, sent
96                 with "zwrite -C", the reply line will be constructed
97                 from the sender and the usernames on the CC: line
98                 of the message being replied to.
99        There is no such thing as C-R, so left C-r as it is but added:
100                 M-r --- edit reply to all
101                 M-R --- edit reply to sender
102       
1031.2.1-pre-1
104        Added RCS Id strings to all files.
105        'show keymaps' shows details of all keymaps after summary list.
106        Added --no-move option to delete command.
107                In particular, delete-and-always-move-down may now
108                be implemented with
109                '( delete --no-move ; next --skip-deleted )'.
110        Folded the nextmsg and prevmsg commands and functions together into
111                one command which takes arguments.
112                Added '--filter <name>' option (eg, for next_personal),
113                '--skip-deleted' option, and
114                '--last-if-none'/'--first-if-none' options.
115                Help updated accordingly. 
116                In particular, the 'personal' view is now used
117                for 'next personal'. 
118        Updated examples/owlconf.erik with the above.
119        Fixed the annoying pagedown sometimes-not-working bug.
120        Made owl_function_fast*filt return a string and not do the
121                narrowing, to make it more general.
122        Added a smartfilter command that creates a filter
123                based on the current message and returns the name
124                of the filter.
125        Added --smart-filter and --smart-filter-instance options
126                to the next and prev commands.
127        Added M-C-n and M-C-p keybindings to "move to next message
128                matching current" and "move to previous message
129                matching current"
130        Added variables edit:maxfillcols and edit:maxwrapcols which
131                will limit how wide editing paragraphs may get before
132                they get wrapped.  This is a max and may be narrower
133                depending on the current size of the window.
134                If 0, the max is unlimited.  Default is 70 columns for
135                edit:maxfillcols and unlimited for edit:maxwrapcols.
136        Added smartzpunt command with key binding of "C-x k".
137                This starts a zpunt command filled in with
138                the proposed zpunt.
139        Fixed a memory reference bug in delete and undelete commands.
140        Added support for perl to call directly back into owl.
141        Changed the implementation of owl::command("...") to immediately
142                call back into owl.  This allows perl to get the return
143                value of strings returned by owl commands.
144        Added the getview command which returns the name of the current
145                view's filter. 
146        Added the getvar command which returns the value of a variable.
147        Added an example to examples/owlconf.erik which uses TAB to
148                narrow and restore the view. 
149        Added an example to examples/owlconf.erik which uses M-c to
150                color messages matching the current one green.
151       
1521.2.0-pre-1
153        Integrated change to fix problem with popup blinking on new zephyrs.
154        C-l and resizes will now refresh an open viewwin (eg, help).
155        Updated doc/code.txt to include info about filters, commands,
156                contexts, and keybindings.
157        Ooops.  "delete view" had accidentally been misbound to M-d.
158                Switched the binding back to M-D.
159        Exec commands cleaned up to not have buffer-size limitations
160                and to not mess up spaces.  exec also returns a string
161                of the output now.
162        Integrated changes from 1.1.3, and added docs for "zlocate -d"
163                and new show commands.
164        Show with arguments produces help on show.
165        Fix a bug in readconfig caught by efence (where we'd try to read before
166                the beginning of a string if it was empty).
167        The perl command doesn't do makemsg directly, but instead
168             returns the string and it will get printed if it
169             was run interactively.
170        New framework for command handling.
171        New framework for keymap handling.
172        Added commands for everything that is bound
173             to a key (do 'show commands' to get the full list).
174        Added 'multi' and '(' commands to allow multiple commands
175             to be specified on a line.             
176        Added user keybindings with bindkey command.
177        Added command aliases (eg, "alias foo bar").
178        Added undelete command that parallels the delete command.
179        Added additional options to delete command.
180        The reply command now takes arguments.
181        Added 'edit:insert-text' command.
182        Added 'show zpunts' to show active punt filters.
183        Added 'show variable <name>' and 'show variables'.
184        Added 'show command <name>' and 'show commands'.
185        Added 'show keymap <name>' and 'show keymaps'.
186        Added 'M-u' to undelete all messages in current view.
187        Fixed dotsend so that the zephyr will still send if there
188             is whitespace after the dot but not on the same line.
189             This should resolve an issue where dotsend wouldn't work
190             if you'd gone up and edited a zephyr.
191       
1921.1.3
193        'show subs' and 'show subscriptions' are now the same as 'getsubs'
194        zlocate now takes an optional -d argument
195        'show terminal' / 'show term'
196        '>' / last doesn't set the last message at the top of the screen now
197        implemented _followlast as an unsupported feature
198        include 'default' in the 'show colors' list
199        added help for 'zpunt' and 'zunpunt'
200        changed the bug address in the startup message
201        can now do 'show status'
202        can now do 'show version'
203        'status' / 'show status' includes the owl version number now
204        'show terminal' includes whether the terminal can change colors
205        fixed off by one bugs in paging / scrolling viewwin
206        don't downcase the sender when getting the log name for personals
207        support @owl::fields as well as @fields
208        downcase class/inst filter names in auto filters
209
2101.1.2
211        Fixed memory mishandling bug
212        Fixed bug in redfining the filter attached to the current view
213        M-n will narrow to message, instance on non-personal, class
214             MESSAGE messages
215        M-N behavies like M-n except that on class messages it narrows
216            to class and instance
217        line wrap earlier, to account for tabbing
218        fixed typo in help
219        'status' command now displays info on terminal color support
220        zephyr @ formatting is now case independant
221        added support for color terminals
222        zephyr @color(foo) now works
223        'D' for deleted messages is now not bold, unless it's the current
224          message
225        F1 displays the help screen
226        added filter colors
227        added the 'colorview' command
228        added the 'show colors' command
229        users who don't have a .zephyr.subs get a simpler format for
230          incoming messages
231        If colors are available 'show filters' will show a filter in the
232          color associated with it.
233        Added the zpunt and zunpunt commands
234        Lines in the subs file starting with '-' are zpunted
235        Include login/logout messages in auto user filters
236        'V' changes to the home view ('all' by default)
237       
2381.1.1
239        Fixed perl, aperl, and pperl commands to deal with quoting
240              and spaces in a saner manner.
241        Removed all owl_get_* methods for booleans and switched
242              cases where they were used to owl_is_*
243        Changes to owlconf.erik to use some new features.
244        Increased the size of the help buffer (as it
245              was overflowing and truncating the help message).
246        Variables prefixed with a _ are not shown in help
247              or by printallvars (and prefixed Not Yet Implemented
248              variables with this).
249        Fix typo in help
250        include stdio.h in functions.c
251        remove stale "q to quit" from bottom of info message
252        fix downward scrolling more than a page
253        use authentication for zlocate, by default
254        fixed buffer over run in info command on long messages
255        call 'perl <file>' from Makefile to avoid hardcoding perl paths
256        in Makefile don't build owl_prototypes.h unless necessary
257        store the time for admin messages
258        display admin message time in 'info' command
259        fixed an editwin M-> last character bug
260               
2611.1
262        reply is a normal function now
263        'R' does reply to sender
264        'T' tells you how many messages were marked for deletion
265        local realm removed from login / logout messages
266        added command history
267        better runtime / starttime reporting in 'status' command
268        leave the pointer near the current message after expunge
269        C-l recenters editwin
270        implemented zlocate
271        @italic works the same as @i
272        on reply only quote class / instance when necessary
273        C-r allows you to edit the reply line
274        don't use unecessary options in reply line
275        display 'info' errors in msgwin, not popup
276        impelemnted aexec, pexec commands
277        the zsig now goes through ztext formatting
278        messages have id numbers now
279        'info' prints the msgid
280        added the 'filter' command
281        added the 'view' command
282        added the 'show filter' command
283        added the 'viewclass' (and 'vc') commands
284        added the 'viewuser' (and 'vu') commands
285        M-n will filter to the current class or user
286        'v' starts a view command
287        M-D will delete all messages in current view
288        added the 'delete' (and 'del') command
289        load-subs with no argument loads the default subs file
290        '<truncated>' is now when the *current* message is truncated
291        the reply-lockout filter (with default) specifices messages that
292           cannot be replied to.
293        in the configfile owl::receive_msg is run whenever a message is
294          received
295        added the beep command
296        added the contributors file
297        declare ZGetSubscriptions and ZGetLocations since the includes
298          don't seem to
299        fixed bug in displaying last line in popwin if no final '\n'
300        'T' uses the 'trash' filter now
301        zaway_msg, zaway_msg_default and zaway are all user variables now.
302        zsig variable overrides zsigproc
303        If there's no appendtosepbar don't interfear with the sepbar
304        Changed: owl_message_get_numlines will return 0 of m is NULL
305        Added login messages to messages marked by owl_function_delete_automsgs
306        Added owl_function_delete_by_id(id) which acts independent of view
307        Added "-id <id>" option to delete command
308        Fixed an arg checking bug in delete command
309        Added owl::id to perl namespace with message id
310        Fixed a memory corruption bug in readconfig.c (where right
311              after the strdup to "out", we'd strcat a \n onto the end.
312              This would be triggered whenever owl::format_msg returned
313              a string not ending in a newline
314        Added 'X' keybinding which expunges and then switches to
315              a view defined by the variable "view_home" which defaults
316              to "all"
317        Consolidated readconfig.c somewhat to remove duplication.
318              owl_config_execute now returns a string.
319        Added an example config file that does vt-style formatting.
320              (examples/owlconf.vtformat)
321        Added the 'perl', 'aperl', and 'pperl' commands which will
322              evaluate perl expressions.
323        Fixed bug where pclose zsigproc would cause zombies
324        Can set zsigproc or zsig to "" to disable
325        Added support for multiple browsers (galeon and none were added).
326              Configure with the "webbrowser" variable.
327        Changing typewinsize height triggers resize event.
328        Added zsig variable which will be used if no zsigproc and non-empty.
329        Added "make test" rule to Makefile which will run regression tests,
330              and added regression testing framework to tester
331        Fixed codelist.pl to ignore static declarations.
332        Added dict.c which contains string->ptr dictionary routines
333              and the owl_dict type.
334              These include regression tests.
335        Overhaul/rewrite of variable handling.  Variables are now managed
336              in an owl_vardict (in g.vars) which contains a dictionary
337              of owl_variable's.  Each owl_variable has dispatch functions
338              for validating values, setting it and getting it,
339              and for setting it to and from string values.
340              The variable.c file contains the list of variables.
341              Stubs for the owl_global_<varname>_get functions and friends
342              are generated from variable.c by stubgen.pl.
343              The help.c messages for variables now calls into variable.c
344              so all information about most variables is in one place.   
345        Cleaned out code from global.c and command.c that was made obselete
346              by variable overhaul.
347        The set command now takes a -q option to not log a message.
348        Fixed a bug where set and print with no arguments would
349              print "Undefined variable" in addition
350              to running owl_function_printallvars.
351        debug is now a variable that can be turned on and off.
352        Fixed mail,inbox message parsing in examples/owlconf.erik
353        Made zaway_msg and zaway_msg_default into variables
354        Changed owl_function_makemsg and owl_function_debugmsg
355               to use varargs (ie, so they can now take a format
356               string with args).
357        Don't allow " and \ characters in URLs with the "w" command.
358        Removed lots of build warnings.
359        Popwins are wider by default so help messages fit better.
360        Added an atokenize_free function.
361        Fixes to work with an older version of libzephyr.
362        Added dependencies on header files to Makefile.in
363        Added pageup and pagedown key bindings to message list
364        Added pageup and pagedown to viewwin
365        Added configfile section to doc/intro.txt (from example config file)
366        Added appendtosepbar variable which may contain text which will
367              be appended to the sepbar.  This allows the configfile
368              to put information about pings and logins into
369              the sepbar.  (It may be worth also providing a variable
370              which enables this by default, but for now this allows
371              for experimenting with what works well.)
372        Added doc/code.txt which gives a brief overview of the code.
373        Added tags makefile rule and added TAGS to distclean rule.
374       
3751.0.1
376        fix frees in loadsubs and loadloginsubs
377        don't return in owl_free
378       
3791.0
380        'print' and 'set' with no arguments prints all variables
381        Added the 'unsubscribe' and 'unsub' command
382        Renamed the 'unsub' command to 'unsuball'
383        Added the 'getsubs' command which is like zctl ret
384        Fixed bug in logging messages sent to more than one recipient
385        Support '-C', '-O', and '-n' options to zwrite
386        Fixed bug in owl_editwin_delete_char when there are no later chars
387          after the cursor
388        Make "more" and "truncated" work in the status bar
389        enable printing of zsigproc and loginsubs variables
390        only allow message scrolling if the message is actually off the
391          screen
392        'T' will mark all automated message for deletion
393        'P' will go to the next personal message
394        'M-P' will go to the previous personal message
395        replying to a login message goes to the user now
396        added a status command
397        added the intro doc to the release
398        fixed off by one bug in viewwin
399        added complete online help
400        pass $owl::realm in configfile
401        fixed editwin wordwrapping on the last line
402        fixed editwin problem with key_right past the last char
403        print an error and quit if the configfile can't be parsed
404        got rid of owl_mainwin_calculate_topmsg
405        fixed off by one error in calculating topmsg upwards
406        you can now reply to an admin message
407        don't display an error about keypress on window resize
408       
4090.11
410        fixed bug in viewing messages longer than the screen
411        indicate in the sepbar if there is a non zero vert offset
412        send on '.' on a line by itself
413        added disable-ctrl-d variable
414        fixed bug where C-k did not delete the last \n in the buffer
415        make non-character meta keys work
416        use ZSendNotice instead of ZSendList
417        implemented <, >, M-< and M-> in viewwin
418        removed the spaces at the bottom of viewwin
419        added 'about' command
420        fixed bug using 'M' with no current message
421        changed message object to use char *'s to save on memory
422        change malloc, realloc, strdup and free to use owl hooks so that
423           debugging can be added
424               
4250.10.1
426        fixed a trailing space bug in the parser
427        impelemented the "burning ears" feature
428        have admin messages do ztext parsing
429        fixed bug in reporting which M- key was pressed
430        C-g will now cancel commands like C-c
431       
4320.10
433        implemented owl_function_full_redisplay().
434        C-l uses owl_function_full_redisplay().
435        when a popwin exists to a full redisplay.  (fixes bug)
436        improved the owl_editwin_process_char logic
437        removed all unnecessary wrefresh's and replaced with wnoutrefesh
438        owl_editwin_redisplay now takes an argument to optionally doupdate()
439        improved the cut-and-paste speed by not doing a usleep the first
440          time through the loop after getting a keypress.
441        nuked typwin.c and associated stuff.  It's useless now.
442        added viewwin code for paging windows
443        curly braces work for zephyr formatting
444        @i in zephyr formatting will be displayed as underlined text
445        turned off idlok
446        implemented viewwin
447        implemented viewwi in popwin for pageable popwins
448        help, info now use pageable popwins
449        bound 'M' to bring the current message up in a popwin
450        return, space bar, 'b' and backspace now scroll within a message
451        turned off resize message
452        C-v and M-v page the main window
453        implemented owl_message_is_mail
454        some build cleanup
455
456       
4570.9
458        added owl_message_is_personal and have things use it
459        added owl_message_is_private
460        fixed 'print personalbell' and have 'set personalbell'
461           print a message
462        bold only on message_is_personal
463        display the realm if not local
464        implemented M-f, M-b, M-d, M-<, M-> in editwin
465        implemnted word wrapping in editwin
466        implemented M-q (paragraph-fill) in editwin
467        fixed bug that caused owl to segfault logging a 'weird' class
468        M-x is a keysym for ':'
469        added smart bolding and userclue
470        fixed a bug causing pings to beep even if rxping is off
471       
4720.8.1
473        fixed bug in logging code
474       
4750.8
476        implemented personal logging
477        implemented class logging
478        implemented resize of typewin
479        fixed the backspace problem
480        -v command line option prints the version number
481       
4820.7
483        load-subs will report error opening file
484        skip comment lines in loadsubs and loadloginsubs
485        changed internal references to rxping and txping
486        fix replying to a blank instance
487        added subscribe command
488        subscribe to login messages from .anyone by default
489        'loginsubs' variarble controlls automated login messages
490        redisplay the editwin after a resize
491        leave the cursor in the editwin if active
492        fix problems in the build system
493        added displayoutgoing variable
494        temporarily removed error printing for zlog in / out
495       
4960.61
497        fixed bug in "message sent to <foo>" for zwrite
498       
4990.6
500        help updated
501        zaway key set to caps A
502        support zephyring other realms
503        rxping variable for receiving pings
504        txping variable for sending pings
505        function in place to resize typwin
506        C-l to refresh
507        personal bell variable
508        beta message now an admin message
509       
5100.5
511        Added the debug command and flag
512        Fixed bug in printing fields in info command
513        Added owl_fmtext_append_ztext and use it
514        Better formating for pings and login zephyrs
515        make tester depends on proto
Note: See TracBrowser for help on using the repository browser.