source: examples/owlconf.simple @ 7803326

release-1.10release-1.4release-1.5release-1.6release-1.7release-1.8release-1.9
Last change on this file since 7803326 was d7cc50b, checked in by Anders Kaseorg <andersk@mit.edu>, 15 years ago
Death to more RCS keywords. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
  • Property mode set to 100644
File size: 9.6 KB
Line 
1### The owlconf config file   -*- perl -*- 
2
3### !!!!!WARNING!!!!! !!!!!WARNING!!!!! !!!!!WARNING!!!!! !!!!!WARNING!!!!!
4### This is an example file intended to demonstrate how to use
5### various features of owl.  Some of the key bindings, in particular,
6### are more for examples than things you may actually want to use.
7### Make sure to read through it first and understand it before just using it.
8### Don't blame me if anything in here ends up vaporizing your dog.
9### !!!!!WARNING!!!!! !!!!!WARNING!!!!! !!!!!WARNING!!!!! !!!!!WARNING!!!!!
10
11###
12### This file is interpreted by the perl interpreter.
13### If you wish to execute an owl command use the
14### function owl::command().  i.e.
15###
16###      owl::command("set zsigproc /mit/kretch/bin/getzsig");
17###
18### will set the owl variable zsigproc.  Subroutines created with
19### the names below will be executed at the specified times:
20###
21###     subroutine name    properties
22###     ---------------    ----------
23###     owl::startup()     run when owl first starts
24###     owl::shutdown()    run when owl exits
25###     owl::format_msg()  run when a new message arrives, the return
26###                           value is used to display the message on the
27###                           screen
28###     owl::receive_msg() run when a message is received, and after
29###                        it has been added to the message list
30###
31###
32### The following variables will be set each time a message is recevied
33### and when owl::format_msg() and owl::receive_msg() are run.
34###
35###     $owl::class, $owl::instance, $owl::recipient, $owl::direction,
36###     $owl::sender, $owl::opcode, $owl::zsig,
37###     $owl::msg, $owl::time, $owl::host, @owl::fields, $owl::id
38###   
39
40# NOTE: Lines beginning with a "#" are perl comments.
41
42
43# This subroutine is run whenever owl starts up.
44# The owl::command("foo") lines execute the owl command "foo".
45sub owl::startup {
46
47    ################################################################
48    ## The following set the values of variables.
49    ## Doing "help" will show you more about each variable.
50    ## These lines will set things to the default.
51    ## You can uncomment them and then change the value to get
52    ## a different behavior (remove the "#" to an alternate value).
53    ################################################################
54
55    ## Set this to off to disable the terminal bell.
56    # owl::command('set -q bell on');
57
58    ## Set this to off to disable the terminal bell on personal zephyrs.
59    # owl::command('set -q personalbell off');
60
61    ## Set this to on to enable logging of personal zephyrs
62    # owl::command('set -q logging off'); 
63
64    ## This directory must exist and is where personal zephyrs are logged.
65    ## By default, this is the ~/zlog/personal/ directory
66    # owl::command('set -q logpath '.$ENV{'HOME'}.'/zlog/personal/');
67
68    ## Set this to on to enable logging of classes
69    # owl::command('set -q classlogging off'); 
70
71    ## This directory must exist and is where class zephyrs are logged.
72    ## By default, this is the ~/zlog/class/ directory
73    # owl::command('set -q classlogpath '.$ENV{'HOME'}.'/zlog/class/');
74
75    ## If set to on, this will make is so that C-d doesn't
76    ## send zephyrs by accident.
77    # owl::command('set -q disable-ctrl-d off');
78
79    ## If set to on, outgoing messages will be displayed.
80    # owl::command('set -q displayoutgoing on');
81
82    ## Displays received pings?
83    # owl::command('set -q rxping off');
84
85    ## Send pings?
86    # owl::command('set -q txping on');
87
88    ## Size of typing window at the bottom of the screen
89    # owl::command('set -q typewinsize 8');
90
91    ## Which view to switch to after the 'V' or 'X' commands.
92    # owl::command('set -q view_home all');
93
94
95    ## Default message to send when zaway is on (toggle with 'A')
96    # owl::command('set -q zaway_msg_default "Not here now..."');
97
98    ## Default zephyr signature.
99    # owl::command('set -q zsig "meep"');
100
101    ## Program to generate a zsig.
102    # owl::command('set -q zsigproc "/mit/foo/bin/randzsig"');
103
104
105    ################################################################
106    ## The following create filters.  Filters can be used to select
107    ## on multiple zephyrs for operations.  With 'views' you can
108    ## look at only the zephyrs matching a particular filter.
109    ## Use the 'view <filtername>' command or the 'v' key to switch views.
110    ## The 'V' key will switch you back to your 'view_home' view.
111    ## The M-D key will delete all messages in the current view
112    ##
113    ##
114    ## The filter command creates a filter with the specified name,
115    ## or if one already exists it is replaced.  Example filter
116    ## syntax would be:                                       
117    ##
118    ##    filter myfilter -c red ( class ^foobar$ ) or ( class ^quux$ and instance ^bar$ )
119    ##
120    ## Valid matching fields are class, instance, recipient, sender, opcode
121    ## and realm.  Valid operations are 'and', 'or' and 'not'.  Spaces must be
122    ## present before and after parenthesis.  If the optional color argument
123    ## is used it specifies the color that messages matching this filter
124    ## should be displayed in.  Do 'show colors' to see the available colors.
125    ##
126    ################################################################
127
128    ## This would create a shortcut to only show personal messages
129    ## with filter 'me' and to color them yellow.
130    ## Replace myusername with yours.
131    # owl::command('filter me -c yellow recipient myusername');
132
133    ## This would create a 'quiet' filter to not show messages
134    ## on noisy classes and instances.
135    # owl::command('filter quiet not ( class ^foo|bar|quux$ or instance ( ^baaz$ ) ');
136
137    ## The 'trash' filter is used when you press 'T' to mark things
138    ## for autodeletion.
139    # owl::command('filter trash class ^mail$ or opcode ^ping$ or type ^admin$ or class ^login$');   
140
141}
142
143## This is run when owl exits.  Currently this does nothing.
144sub owl::shutdown {
145}
146
147## This is run to format the contents of the message.
148## It returns a string which is a formatted message.
149## The following variables will be set each time before this is run:
150##
151##     $owl::class, $owl::instance, $owl::recipient,
152##     $owl::sender, $owl::opcode, $owl::zsig,
153##     $owl::msg, $owl::time, $owl::host, @owl::fields, $owl::id
154
155sub owl::format_msg {
156    my $out, $tmp;
157
158    ## Strip out noise from the sender string.
159    $owl::sender=~s/\@ATHENA\.MIT\.EDU$//;
160    $owl::sender=~s/\@local-realm$//;
161    $owl::recipient=~s/\@ATHENA\.MIT\.EDU$//;
162    $owl::recipient=~s/\@local-realm$//;
163
164    ## Format ping, login, and mail messages.
165    ## uc(foo) upcases the string and "eq" does string comparison.
166    if (uc($owl::opcode) eq "PING") {
167        return("\@bold(PING) from \@bold($owl::sender)\n");
168    } elsif (uc($owl::class) eq "LOGIN") {
169        if (uc($owl::opcode) eq "USER_LOGIN") {
170            $out="\@bold(LOGIN)";
171        } elsif (uc($owl::opcode) eq "USER_LOGOUT") {
172            $out="\@bold(LOGOUT)";
173        } else {
174            $out="\@bold(UNKNOWN)";
175        }
176        $out.=" for \@bold($owl::sender) at $fields[0] on $fields[2]\n";
177        return($out);
178    } elsif (uc($owl::class) eq "MAIL" and uc($owl::instance) eq "INBOX") {
179        $out = "\@bold(MAIL) ";
180        if ($owl::msg =~ /^From:\s+(.+)\s*$/m) { $out .= "From $1 "; }
181        if ($owl::msg =~ /^To:\s+(.+)\s*$/m) { $out .= "To $1 "; }
182        if ($owl::msg =~ /^Subject:\s+(.+)\s*$/m) { $out .= "Subject $1 "; }
183        return($out."\n");
184    }
185
186    ## The remainder formats normal messages (eg, to classes and instances).
187    ## Outgoing messages have different headers than incoming messages.
188    ## Note that:
189    ##   $out .= "foo";  appends "foo" to the end of the variable $out.
190    ##   lc(bar) will convert bar to lowercase.   
191    ##   "ne" does "not equal" for string comparison.
192    ##   sprintf fills in the %s's with the arguments later on the line.
193    ##   "foo"."bar" will append the two strings together.
194
195
196    if ($owl::direction eq "out") {
197        # Outgoing messages
198
199        $out .= sprintf "[outgoing to %s] / %s", $owl::recipient, $owl::time;
200        if ($owl::opcode ne "") {$out.=" op:$owl::opcode";}
201        $out.="\n";
202        $out.= "  \@bold($owl::sender)> ";
203        if ($owl::zsig ne "") {
204            my $zsig = $owl::zsig;
205            $zsig =~ s/(\n.*)+$/ [...]/;
206            if (length($zsig)+5+length($owl::sender) > 70) {
207                $out.="# ...";
208            } else {
209                $out.="# $zsig";
210            }
211        }
212    } else {
213        # Incoming messages
214
215        $out .= sprintf "[mit,%s,%s] / %s / %s", lc($owl::class), 
216                        lc($owl::instance), $owl::time, lc($owl::host);
217        if ($owl::opcode ne "") {$out.=" op:$owl::opcode";}
218        $out.="\n";
219        $out.= "  \@bold($owl::sender)> ";
220        if ($owl::zsig ne "") {
221            my $zsig = $owl::zsig;
222            $zsig =~ s/(\n.*)+$/ [...]/;
223            if (length($zsig)+5+length($owl::sender) > 70) {
224                $out.="# ...";
225            } else {
226                $out.="# $zsig";
227            }
228        }
229    }
230    $out.="\n";         
231
232    # This indents the body of the message and then appends it on.
233    $tmp=$owl::msg;
234    $tmp=~s/^/    /g;
235    $tmp=~s/\n/\n    /g;
236    $out.=$tmp;
237
238    # This makes personal messages bold.
239    if (uc($owl::class) eq "MESSAGE" &&
240        uc($owl::instance) eq "PERSONAL" &&
241       $owl::direction eq "in") {
242        $out="\@bold{".$out."}";
243    }
244
245    # Finally, this appends a newline and returns the formatted message.
246    return($out."\n");
247}
248
249## This is run when a message is received, and after
250## it has been added to the message list.
251## In most cases you won't need anything here.
252sub owl::receive_msg() {
253   
254    ## If this is uncommented, it would mark all messages
255    ## with opcode "PING" for immediate deletion:
256    #
257    # if (uc($owl::opcode) eq "PING") {
258    #    owl::command("delete -id $owl::id");
259    # }
260
261    ## If this is uncommented, it would mark all messages
262    ## with class "LOGIN" for immediate deletion:
263    #
264    # if (uc($owl::login) eq "LOGIN") {
265    #    owl::command("delete -id $owl::id");
266    # }
267
268    return 1;
269}
Note: See TracBrowser for help on using the repository browser.