Timeline
Jul 17, 2011:
- 10:08 PM Changeset [883502d]release-1.10release-1.9 by
- Bump version for development.
- 10:08 PM Changeset [65ff3f4]release-1.10release-1.8release-1.9 by
- Add initial ChangeLog for the 1.8 release
- 9:46 PM Changeset [b0f5fe8]release-1.10release-1.8release-1.9 by
- Sync ChangeLog with release-1.7 branch
- 8:50 PM Changeset [14c15d9] by
- Use wbkgrndset instead of wbkgdset in _owl_fmtext_wcolor_set This allows color pairs past 255 in an ext-color-enabled build to work. In theory anyway. Turns out ncurses is buggy and setcchar doesn't work, but when the patch is accepted upstream we can update the ncurses in the locker.
- 6:56 PM Changeset [375df9c] by
- Merge 78a024a42892ff3336097dff8dd877a8a13ac783 into 67e5ba36abe583efd14108ede63b5f5f26887257
- 6:55 PM Changeset [4cb1aa2b] by
- Merge 176d2c7577a41cbdc70b532db15ec858803cfa60 into 67e5ba36abe583efd14108ede63b5f5f26887257
- 6:54 PM Changeset [67e5ba36]release-1.10release-1.8release-1.9 by
- Include the ncursesw headers They're apparently supposed to be compatible with the standard ones, but we get wchar_t versions of various functions and should be able to eliminate libncurses5-dev from the build deps. We also get setcchar, wbkgrndset, and friends which are needed to properly handle ext-colors in some cases.
Jul 16, 2011:
- 10:48 PM Changeset [78a024a] by
- Clamp the number of color pairs even on ncurses ABI 6 We should be able to handle color pairs past 256 on ABI 6 (which is most distributions but Debian-based ones), but there are more changes that need to be done. We cannot use COLOR_PAIR() and OR it into an attr_t. This means we also can't use wbkgdset and must use wbkgrdset and setcchar, but that does not seem to be sufficient. It's possible ncurses is buggy here. For now, just use the same hack as, either way, we are not ready for ext-colors yet.
- 1:08 AM Changeset [e9d74be] by
- Merge 3159e27b4b81e297a2fdbb906d6d59bcc22eb121 into b7117112ee9d20379a32ee09e7ca4c1a223bef1c
- 1:08 AM Changeset [117a955] by
- Merge 05725694eae03ea2a194fdef4bfedcdbf902813e into b7117112ee9d20379a32ee09e7ca4c1a223bef1c
- 1:08 AM Changeset [a105012] by
- Merge b8f79620c0726878681d823e0d2b042d03c998a0 into b7117112ee9d20379a32ee09e7ca4c1a223bef1c
- 12:34 AM Changeset [b711711]release-1.10release-1.8release-1.9 by
- Bundled libraries are in perl/modules now Reported-by: Edward Z. Yang <ezyang@mit.edu>
- 12:34 AM Changeset [9c58232]release-1.10release-1.8release-1.9 by
- Document the dependencies of the Twitter module Most of the stuff is pulled in by Net::Twitter::Lite, but we also use HTML::Entities (from HTML-Parser).
- 12:34 AM Changeset [0de04fa]release-1.10release-1.8release-1.9 by
- Check for AnyEvent and Glib in configure.ac They're dependencies of the core perl code now.
- 12:34 AM Changeset [5b24dc0]release-1.10release-1.8release-1.9 by
- Fix up dependencies in README file Class::Accessor is a dependency of the core code. Also, most of the ones listed are Jabber module dependencies, so we may as well list them as such. Reported-by: William Throwe <wthrowe@mit.edu>
- 12:31 AM Changeset [c855755]release-1.10release-1.8release-1.9 by
- Suppress ZERR_INTERNAL from ZSetLocation for pre-3.0 zephyr If you are subbed to your own login notifications, ZSetLocation will wait for the wrong notice and return a spurious ZERR_INTERNAL. Fortunately, from the debian/changelog, this was fixed right near the boundary between 2.0 and 3.0, so we can suppress it for the old ABI.
- 12:31 AM Changeset [2770be99]release-1.10release-1.8release-1.9 by
- Don't remove GPollFDs in a source's finalize Arguably this was somewhat of a poor move on glib's part, but you trip over an assert if you remove a poll from a destroyed source. (This is distinct from an unref; a source gets the destroyed flag when it is removed from its GMainContext, and it is finalized when it loses all its references.) Reported-by: Edward Z. Yang <ezyang@mit.edu>
- 12:29 AM Changeset [165b0c9] by
- Merge f6ab6ee703220c4fbafada73532fbcdc3454705a into c6332f56e9c66ca3e95915c3678d8f2426a46598
- 12:28 AM Changeset [f6ab6ee]release-1.10release-1.8release-1.9 by
- Use env to set HARNESS_PERL in the prove call Apparently the previous formulation did not work on Solaris.
- 12:28 AM Changeset [f415f83]release-1.10release-1.8release-1.9 by
- Don't manually bootstrap BarnOwl in t/unicode.t We use a custom perl interpreter, so the BarnOwl module has already been bootstrapped. Silences warnings on older versions of perl. Also explicitly use BarnOwl in the test so we don't rely on it being done for us.
- 12:28 AM Changeset [0ba7333]release-1.10release-1.8release-1.9 by
- Use g_build_filename to compute reference paths If the home directory has a trailing slash (for instance, on multics, root's home is actually '/') then our expected path is wrong.
- 12:28 AM Changeset [f5f6ec0]release-1.10release-1.8release-1.9 by
- Don't use export FOO=bar syntax in runtests.sh Solaris' shell can't run those. We can actually remove the variables altogether since the tester/barnowl wrapper will take care of it. Also make the error message in the latter more accurate.
- 12:28 AM Changeset [8219374]release-1.10release-1.8release-1.9 by
- Use getpwnam_r instead of getpwnam It's re-entrant, so that's probably a good thing in case some other thread calls getpwnam. More relevantly, Solaris has both a standard and a non-standard version, and perl redefines getpwnam to a getpwnam_r. We manage to convince Solaris to use the standard form, but perl doesn't seem to notice and defines the macro wrong. So just avoid the function altogether. Seems as reasonable of an excuse to use the ostensibly better (and infinitely less friendly) one as any.
- 12:28 AM Changeset [99ac28a]release-1.10release-1.8release-1.9 by
- Use GPid instead of pid_t for g_spawn_async's output Apparently they manage to be different on Solaris. GPid is int while pid_t is long. Better to cast the value than the pointer.
- 12:28 AM Changeset [396505be]release-1.10release-1.8release-1.9 by
- Use owl_global_get_homedir for ~ in owl_util_makepath It's strange that ~/.zephyr.subs and ~/.owl/startup are computed differently. We should use the same one. This also matches bash in that ~ prefers $HOME over passwd. If don't have a homedir at all, this defaults to / instead of keeping the ~, but that won't happen and at least it's consistent with existing behavior for zephyr dotfiles.
- 12:28 AM Changeset [e59d775]release-1.10release-1.8release-1.9 by
- Use the old-style mkpath invocation Allows the unit tests to run on perl 5.8.
- 12:28 AM Changeset [055e366]release-1.10release-1.8release-1.9 by
- Run barnowl-perl-config in locker-build This way we can still run the unit tests.
Jul 15, 2011:
- 11:40 PM Changeset [c6332f5]release-1.10release-1.8release-1.9 by
- Compute the home directory in zcrypt as in owl_global While I'm here, may as well be consistent and fall back to passwd entries as appropriate.
- 11:40 PM Changeset [dde1b4d]release-1.10release-1.8release-1.9 by
- Use g_build_filename instead of g_strdup_printf to build paths Saves us a duplicate slash in a few places, although most of the time it doesn't do anything. Eh, may as well use it and be more explicit or something. Also change the one existing call to g_build_path to g_build_filename instead. It's much less of a pain to use.
Jul 13, 2011:
- 11:51 PM Changeset [8f5afcf] by
- Merge a7b125d60dcd2a22d2dfb2634982352acdcbc51c into 30d0cf75d34271caa5cca99bfac799fb7aaed6d7
- 11:32 AM Changeset [30d0cf7]release-1.10release-1.8release-1.9 by
- Change Owl to BarnOwl in variable.c I seemed to have missed one when I made a16d7e5b1281bf21e0fe52b6d9946fd58893da28
Jul 12, 2011:
- 11:27 PM Changeset [05725694] by
- Don't remove GPollFDs in a source's finalize Arguably this was somewhat of a poor move on glib's part, but you trip over an assert if you remove a poll from a destroyed source. (This is distinct from an unref; a source gets the destroyed flag when it is removed from its GMainContext, and it is finalized when it loses all its references.) Reported-by: Edward Z. Yang <ezyang@mit.edu>
- 10:57 PM Changeset [24b2f18]release-1.10release-1.8release-1.9 by
- Move actual truncation inside conditional. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 10:35 PM Changeset [33501b2] by
- Move actual truncation inside conditional. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 12:26 PM Changeset [a7b125d] by
- Compute the home directory in zcrypt as in owl_global While I'm here, may as well be consistent and fall back to passwd entries as appropriate.
- 12:26 PM Changeset [06af663] by
- Use g_build_filename instead of g_strdup_printf to build paths Saves us a duplicate slash in a few places, although most of the time it doesn't do anything. Eh, may as well use it and be more explicit or something. Also change the one existing call to g_build_path to g_build_filename instead. It's much less of a pain to use.
- 11:49 AM Changeset [b8f7962] by
- Suppress ZERR_INTERNAL from ZSetLocation for pre-3.0 zephyr If you are subbed to your own login notifications, ZSetLocation will wait for the wrong notice and return a spurious ZERR_INTERNAL. Fortunately, from the debian/changelog, this was fixed right near the boundary between 2.0 and 3.0, so we can suppress it for the old ABI.
Jul 11, 2011:
- 11:21 PM WikiStart edited by
- We support Twitter now too (diff)
- 10:33 AM Changeset [220db88] by
- Merge 16cf182d1bda3c32ab0cf40b5848f9b365f22a97 into a130fc5ed65377322966cc9423b3e4674197922c
- 10:31 AM Changeset [16cf182d]release-1.10release-1.8release-1.9 by
- Remove unused global variables I'm not sure why they existed in the first place (they were present in the initial commit), but, AFAICT, they've never been used.
- 9:49 AM Changeset [820e852]release-1.10release-1.8release-1.9 by
- Make help show the correct keybinding for A c65d81ed60fefed19f5e607c975771b10bcb62bd neglected to update help.c
Jul 10, 2011:
- 10:26 PM Changeset [3159e27] by
- Bundled libraries are in perl/modules now Reported-by: Edward Z. Yang <ezyang@mit.edu>
- 9:55 PM Changeset [176d2c75] by
- Include the ncursesw headers They're apparently supposed to be compatible with the standard ones, but we get wchar_t versions of various functions and should be able to eliminate libncurses5-dev from the build deps.
- 6:34 PM Changeset [998aecf] by
- Document the dependencies of the Twitter module Most of the stuff is pulled in by Net::Twitter::Lite, but we also use HTML::Entities (from HTML-Parser).
- 6:28 PM Changeset [c964e34] by
- Check for AnyEvent and Glib in configure.ac They're dependencies of the core perl code now.
- 6:28 PM Changeset [4168fb8] by
- Fix up dependencies in README file Class::Accessor is a dependency of the core code. Also, most of the ones listed are Jabber module dependencies, so we may as well list them as such. Reported-by: William Throwe <wthrowe@mit.edu>
Jul 9, 2011:
- 11:26 PM Changeset [4bf2a11] by
- Merge 8d8685d882b375158b4303af346ebccd0678c54b into a130fc5ed65377322966cc9423b3e4674197922c
- 10:38 PM Changeset [8d8685d] by
- Use the old-style mkpath invocation Allows the unit tests to run on perl 5.8.
- 10:00 PM Changeset [4823b08] by
- Run barnowl-perl-config in locker-build This way we can still run the unit tests.
- 5:30 PM Changeset [976e58a] by
- Don't pass --failure to prove by default Unfortunately the option is old and some of our build chroots don't understand it. This reverts 786a4108f9184d7c73170d373bc2cf80347b6456. Instead, pass "$@" to prove so that we can pass options on the command-line when running the tests manually.
- 4:11 PM Changeset [a130fc5]release-1.10release-1.8release-1.9 by
- Improved ability to delete messages from perl BarnOwl::Message now has a delete_and_expunge command, and BarnOwl::queue_message returns the queued message, so that deletion actually works; there used to be no way to get the id of a queued message, and so ->delete() didn't actually do anything...
- 4:11 PM Changeset [efeec7f]release-1.10release-1.8release-1.9 by
- Added a delete-and-expunge command. This command is analogous to the delete command, except that it also expunges only the {current,given} message. It also takes an optional --quiet parameter, because I plan to use it internally and don't want spew on success. Perhaps there's a better way to accomplish this... I couldn't figure out how the existing delete command is supposed to work internally. The logic behind the delete-and-expunge command is as follows: We always update both the message list and the display. So model the command that will do much of the work, owl_function_delete_and_expunge_message, off of owl_function_expunge. owl_function_delete_and_expunge_message takes one argument, which is the position of the item in the message list. It deletes it from the message list with a new function owl_messagelist_delete_and_expunge_element. This calls delete on the underlying owl_list, so the errors (if any) on an index that is too big might be unhelpful. owl_function_delete_and_expunge_cur and owl_function_delete_and_expunge_by_id both get the index of the relevant message (and a function owl_messagelist_get_index_by_id is added to messagelist.c to help the latter). They owl_function_error if no such message exists, and conditionally owl_function_makemsg on success.
- 4:11 PM Changeset [3eeb6ed]release-1.10release-1.8release-1.9 by
- Fixed a bug in the expunge command Expunging from past the end of the message list (e.g., the key strokes d > > x) no longer brings you to the first message. Additionally, the code in owl_function_expunge that is relevant to redisplaying after messages are removed from the message list was placed in helper functions, in preparation for the next commit.
- 4:10 PM Changeset [fe7ece2] by
- Merge caac19d40ffaea75410ce13da172590b04dae2b1 into 786a4108f9184d7c73170d373bc2cf80347b6456
- 4:01 PM Changeset [786a410]release-1.10release-1.8release-1.9 by
- Print out failing lines in prove output Makes diagnosing test failures much easier.
- 4:01 PM Changeset [14c9e05]release-1.10release-1.8release-1.9 by
- Number test output May as well appease TAP here when we can.
- 4:01 PM Changeset [bf5e6a2]release-1.10release-1.8release-1.9 by
- Add unit tests for owl_util_makepath Stress all the relevant cases, including ones the previous code did not handle.
- 4:01 PM Changeset [c0c48d14]release-1.10release-1.8release-1.9 by
- Reimplement owl_util_makepath The new algorithm is cleaner and much more reasonable. foo/~/bar should not expand the ~. Also don't expand '~user /bar' as '/home/user /bar'. Also leave non-existant users unexpanded. It still has some finicky bits of string manipulations, but what can you do. A unit test is coming in the next commit.
- 4:01 PM Changeset [7feba19]release-1.10release-1.8release-1.9 by
- Add some tests for owl_util_baseclass Mostly to stress some edge cases and make sure we don't accidentally crash them someday.
- 4:00 PM Changeset [2367f1c] by
- Merge 37ac3443e4be8b822ab13b34901c88bcb8ed375f into a16d7e5b1281bf21e0fe52b6d9946fd58893da28
- 3:59 PM Changeset [c76a12a] by
- Merge 6dfcb9e08f0b695564e63b9805b65e2314a8ee19 into a16d7e5b1281bf21e0fe52b6d9946fd58893da28
- 3:59 PM Changeset [a16d7e5]release-1.10release-1.8release-1.9 by
- Replaced 'Owl' with 'BarnOwl' in user visible places Updated :show license to match COPYING
- 3:59 PM Changeset [7756dde]release-1.10release-1.8release-1.9 by
- Fix a typo in variable.c and a typo in filterelement.c
- 3:56 PM Changeset [37ac344] by
- Print out failing lines in prove output Makes diagnosing test failures much easier.
- 3:56 PM Changeset [e073081] by
- Number test output May as well appease TAP here when we can.
- 3:56 PM Changeset [5aab6559] by
- Add unit tests for owl_util_makepath Stress all the relevant cases, including ones the previous code did not handle.
- 3:56 PM Changeset [ffe1135] by
- Reimplement owl_util_makepath The new algorithm is cleaner and much more reasonable. foo/~/bar should not expand the ~. Also don't expand '~user /bar' as '/home/user /bar'. Also leave non-existant users unexpanded. It still has some finicky bits of string manipulations, but what can you do. A unit test is coming in the next commit.
- 3:56 PM Changeset [df5488e] by
- Add some tests for owl_util_baseclass Mostly to stress some edge cases and make sure we don't accidentally crash them someday.
- 2:50 PM Ticket #188 (BarnOwl::Style::boldify sometimes fails on nested parenthetical commands) created by
- BarnOwl::Style::boldify('@(@<@{@[@i(@b(foo)bar@b(baz))]}>)') …
Jul 8, 2011:
- 4:25 AM Changeset [6dfcb9e] by
- Replaced 'Owl' with 'BarnOwl' in user visible places Updated :show license to match COPYING
- 4:08 AM Changeset [4a01fc6] by
- Fix a typo in variable.c and a typo in filterelement.c
Jul 6, 2011:
- 1:34 AM Changeset [95c7f0c] by
- Merge 401752a309e8f11f694cfb3aa0e83b2af771e958 into 901cee9b7ebc203aee860a9c5fc3849ed3527532
- 1:31 AM Changeset [401752a]release-1.10release-1.8release-1.9 by
- Run the unit tests before installing the locker build What's the point of having them if we don't force ourselves to run them more?
Jul 4, 2011:
- 12:50 AM Changeset [901cee9]release-1.10release-1.8release-1.9 by
- Don't segfault when you expunge all messages from the messagelist When we used owl_list, trying to get an element from an empty list would return NULL. When we moved to GPtrArray, we dropped this checking, without dropping the assumption that, e.g., owl_view_get_element(v, owl_global_get_curmsg(&g)); works everywhere. This commit adds the logic back in to deal with this case. Additionally, don't segfault on things like :unpunt -1.
Jul 3, 2011:
- 11:47 PM Changeset [530c51c] by
- Merge 5c2ef5b8924ebc9e6c3d006f362dde3e73568d68 into 785ee770a72bcdda39fd541a90d8c640fa5c76ca
- 11:42 PM Changeset [5c2ef5b] by
- Don't segfault when you expunge all messages from the messagelist When we used owl_list, trying to get an element from an empty list would return NULL. When we moved to GPtrArray, we dropped this checking, without dropping the assumption that, e.g., owl_view_get_element(v, owl_global_get_curmsg(&g)); works everywhere. This commit adds the logic back in to deal with this case. Additionally, don't segfault on things like :unpunt -1.
- 9:17 PM Ticket #184 (Default zsigs are empty) closed by
- fixed: Resolved by ca749a95d6931025b7d334764a6776c9dbf0325d
- 8:57 PM Changeset [863f4c4] by
- Merge 785ee770a72bcdda39fd541a90d8c640fa5c76ca into 82e93c95ea82cdc4725e91b4d3ac6ac4f0b75f24
- 8:43 PM Changeset [785ee77]release-1.10release-1.8release-1.9 by
- Allow zsigs to be '0' Also, keep the feature that setting the zsig to '' will reset it to the default.
- 8:43 PM Changeset [fa981f3]release-1.10release-1.8release-1.9 by
- Removed some NULL checks for things that really shouldn't ever be NULL If a BarnOwl variable can't be gotten, then something is horribly wrong, and if it can't be gotten as a string, then perl will be confused (and something is probably horribly wrong anyway). Additionally, our variable descriptions shoud be descriptive. Valid settings should not be NULL (and NULL is more likely indicative of forgetting to set it than actually wanting an empty valid set).
- 8:43 PM Changeset [1dab38e]release-1.10release-1.8release-1.9 by
- Make owl_variable_dict_newvar_* give accurate validsettings
- 8:43 PM Changeset [b4a678a]release-1.10release-1.8release-1.9 by
- Added tests to tester.c to make sure that NULL values are gotten appropriately
- 8:43 PM Changeset [ca749a9]release-1.10release-1.8release-1.9 by
- Make variable getters return NULL instead of "<null>" This fixes trac-#184: Since commit 010a9511420887329269aa51e7598533e826c57f, the default zsigs show up as empty; BarnOwl::default_zephyr_signature() checks BarnOwl::getvar('zsigproc') as a boolean (which may be incorrect if you happen to have a zsigproc called 0). As of that commit, BarnOwl::getvar returns "<null>" instead of undef.
- 8:42 PM Changeset [ca54fd6]release-1.10release-1.8release-1.9 by
- Pass owl_variable * around instead of owl_vardict *. This allows (forces) functions to do their own NULL- and type- checking on variables. The functions in varsubs.c get less checking, but if these auto-generated functions are failing, something more serious is probably wrong. The owl_variable_get_* functions type-check their arguments, and owl_function_error if the argument is the wrong type (it's a programmer error and we should make some noise).
- 8:08 PM Changeset [bc1d648]release-1.10release-1.8release-1.9 by
- Drop require_type It's not doing much for us (and would do even less after the next commit). I'm not sure whether or not we should type-check owl_variable_get_*
Jun 30, 2011:
- 3:16 AM Ticket #187 (The editwin should have (optional) spell check) created by
- It would be nice to be able to spell-check my zephyrs from within …
Jun 28, 2011:
- 1:45 PM Changeset [82e93c9]release-1.10release-1.8release-1.9 by
- AX_CHECK_FLAG: Fix to work with autoconf 2.59 • AS_VAR_PUSHDEF([FLAGS], [something containing FLAGS]) caused an infinite loop before v2.65~21. • AS_VAR_APPEND was new in v2.63b~224. • AS_VAR_IF was new in v2.63~27. • AS_ECHO was new in AUTOCONF-2.61a~45, and AC_PROG_GREP in AUTOCONF-2.59c~744, but their use here is more idiomatically replaced with a case pattern anyway. • Before AUTOCONF-2.60b~8, the variable name passed to AC_CACHE_CHECK, AS_VAR_GET, AS_VAR_SET, and AS_VAR_SET_IF must be left unquoted. Signed-off-by: Anders Kaseorg <andersk@mit.edu> (cherry picked from autoconf-archive commit f5ed01f0ce1d9b3be7c0cd92db192bf5c44d7fcb)
- 2:09 AM Ticket #186 (Trac is slow) created by
- Login and view tickets are especially slow.
Jun 27, 2011:
- 1:01 PM Ticket #185 (Barnowl should warn novices that they're not subbed to a triplet ...) created by
- (See also Debathena #938) Every so often, someone will try out zephyr …
- 4:28 AM Changeset [554787e8] by
- Added tests to tester.c to make sure that NULL values are gotten appropriately
- 4:28 AM Changeset [b75a8ac] by
- Make variable getters return NULL instead of "<null>" This fixes trac-#184: Since commit 010a9511420887329269aa51e7598533e826c57f, the default zsigs show up as empty; BarnOwl::default_zephyr_signature() checks BarnOwl::getvar('zsigproc') as a boolean (which may be incorrect if you happen to have a zsigproc called 0). As of that commit, BarnOwl::getvar returns "<null>" instead of undef.
- 4:28 AM Changeset [0d935a1] by
- Pass owl_variable * around instead of owl_vardict *. This allows (forces) functions to do their own NULL- and type- checking on variables. The functions in varsubs.c get less checking, but if these auto-generated functions are failing, something more serious is probably wrong.
- 4:28 AM Changeset [f4e857f] by
- Removed some NULL checks for things that really shouldn't ever be NULL If a BarnOwl variable can't be gotten, then something is horribly wrong, and if it can't be gotten as a string, then perl will be confused (and something is probably horribly wrong anyway). Additionally, our variable descriptions shoud be descriptive. Valid settings should not be NULL (and NULL is more likely indicative of forgetting to set it than actually wanting an empty valid set).
- 4:28 AM Changeset [eeba011] by
- Drop require_type It's not doing much for us (and would do even less after the next commit), and dropping it makes owl_variable_dict_newvar_* a bit more robust.
- 4:28 AM Changeset [3dfc083] by
- Refactored owl_variable_dict_newvar_* to give accurate validsettings, and cleanup better The cleanup no longer depends on the existing variable being the same type, and is more less likely to leak, in particular when the variables have custom delete functions. Variables created from perl now have the appropriate default validsettings.
- 12:38 AM Ticket #184 (Default zsigs are empty) created by
- Since commit 010a9511420887329269aa51e7598533e826c57f, the default …
Jun 26, 2011:
- 10:53 PM Changeset [705ea86] by
- AX_CHECK_FLAG: Fix to work with autoconf 2.59 • AS_VAR_PUSHDEF([FLAGS], [something containing FLAGS]) caused an infinite loop before v2.65~21. • AS_VAR_APPEND was new in v2.63b~224. • AS_VAR_IF was new in v2.63~27. • AS_ECHO was new in AUTOCONF-2.61a~45, and AC_PROG_GREP in AUTOCONF-2.59c~744, but their use here is more idiomatically replaced with a case pattern anyway. • Before AUTOCONF-2.60b~8, the variable name passed to AC_CACHE_CHECK, AS_VAR_GET, AS_VAR_SET, and AS_VAR_SET_IF must be left unquoted. Submitted upstream to https://savannah.gnu.org/patch/index.php?7563 . Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 7:37 PM Ticket #183 (Search should scroll through messages to match) created by
- If I search for a word that appears in the middle of a long message, …
- 12:40 AM Changeset [8fa8d0c] by
- Merge af562f50377925cac37704fd58ad0438060cc7fd into bad44968701bd819226d18137988f6234af2bcb4
Jun 25, 2011:
- 6:14 PM Changeset [af562f5] by
- AX_CHECK_FLAG: Fix to work with autoconf 2.59 • AS_VAR_PUSHDEF([FLAGS], [something containing FLAGS]) caused an infinite loop before v2.65~21. • AS_VAR_APPEND was new in v2.63b~224. • AS_VAR_IF was new in v2.63~27. • AS_ECHO was new in AUTOCONF-2.61a~45, and AC_PROG_GREP in AUTOCONF-2.59c~744, but their use here is more idiomatically replaced with a case pattern anyway. • Before AUTOCONF-2.60b~8, the variable name passed to AC_CACHE_CHECK, AS_VAR_GET, AS_VAR_SET, and AS_VAR_SET_IF must be left unquoted. Submitted upstream to https://savannah.gnu.org/patch/index.php?7563 . Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:11 PM Changeset [1bdbcb1] by
- Merge 708837dc090b1b2239157de1d0aef4e269cf0e55 into bad44968701bd819226d18137988f6234af2bcb4
- 3:10 PM Changeset [708837d] by
- Revert "Replace obsolete AX_C_CHECK_FLAG with AX_CHECK_COMPILE_FLAG" This reverts commit f2a96c0fd0bab7380da67a9616eb04308488ff8f. It uses a macro AS_VAR_IF which is not available on some development environments we still support. (Entertainingly, AX_CHECK_COMPILE_FLAG itself only claims an AC_PREREQ of 2.59 which is probably a bug.)
- 1:17 PM Changeset [bad4496]release-1.10release-1.8release-1.9 by
- Reformat the man page to look more like others It doesn't look like anyone's actually consistent in man page formatting, but this looks decent. Also update it as it's rather stale in places.
- 1:17 PM Changeset [b8a3e00]release-1.10release-1.8release-1.9 by
- Consistently use BarnOwl or barnowl BarnOwl refers to the program, barnowl is the executable and any other identifiers that are conventionally lowercase.
- 10:01 AM Changeset [caac19d] by
- Improved ability to delete messages from perl BarnOwl::Message now has a delete_and_expunge command, and BarnOwl::queue_message returns the queued message, so that deletion actually works; there used to be no way to get the id of a queued message, and so ->delete() didn't actually do anything...
- 10:01 AM Changeset [67b959c] by
- Added a delete-and-expunge command. This command is analogous to the delete command, except that it also expunges only the {current,given} message. It also takes an optional --quiet parameter, because I plan to use it internally and don't want spew on success. Perhaps there's a better way to accomplish this... I couldn't figure out how the existing delete command is supposed to work internally. The logic behind the delete-and-expunge command is as follows: We always update both the message list and the display. So model the command that will do much of the work, owl_function_delete_and_expunge_message, off of owl_function_expunge. owl_function_delete_and_expunge_message takes one argument, which is the position of the item in the message list. It deletes it from the message list with a new function owl_messagelist_delete_and_expunge_element. This calls delete on the underlying owl_list, so the errors (if any) on an index that is too big might be unhelpful. owl_function_delete_and_expunge_cur and owl_function_delete_and_expunge_by_id both get the index of the relevant message (and a function owl_messagelist_get_index_by_id is added to messagelist.c to help the latter). They owl_function_error if no such message exists, and conditionally owl_function_makemsg on success.
- 9:51 AM Changeset [b2bfe1f] by
- Fixed a bug in the expunge command Expunging from past the end of the message list (e.g., the key strokes d > > x) no longer brings you to the first message. Additionally, the code in owl_function_expunge that is relevant to redisplaying after messages are removed from the message list was placed in helper functions, in preparation for the next commit.
- 7:22 AM Changeset [e1d3607] by
- Merge d9fbfd831d2af947f279310e5d92ba2dc15591af into 25891a81c52b4a7460682ef7a3773e6774e73e27
- 6:42 AM Changeset [16ce7a4] by
- Merge 25891a81c52b4a7460682ef7a3773e6774e73e27 into 650fb2c030491f5d6668ad439b83a6a6b7b9870e
- 6:42 AM Changeset [25891a8]release-1.10release-1.8release-1.9 by
- Add a unit test for owl_history Also fix an off-by-one error in bounding the history size. May as well have those semantics be coherent and testable.
- 6:34 AM Changeset [d9fbfd8] by
- Reformat the man page to look more like others It doesn't look like anyone's actually consistent in man page formatting, but this looks decent. Also update it as it's rather stale in places.
- 6:03 AM Changeset [bc932fd] by
- Merge 650fb2c030491f5d6668ad439b83a6a6b7b9870e into 2560529186e398f85a038e8683d29058857eb7b7
- 5:46 AM Changeset [650fb2c]release-1.10release-1.8release-1.9 by
- Update autoconf macros from pkg-config Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 5:46 AM Changeset [378ede7]release-1.10release-1.8release-1.9 by
- Update autoconf macros from autoconf-archive Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 5:46 AM Changeset [f2a96c0]release-1.10release-1.8release-1.9 by
- Replace obsolete AX_C_CHECK_FLAG with AX_CHECK_COMPILE_FLAG Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 4:11 AM Changeset [d8e2f07] by
- Merge 2560529186e398f85a038e8683d29058857eb7b7 into 95b52d17a566adefc77f07749218fe0cb33a66b2
- 4:09 AM Changeset [2560529]release-1.10release-1.8release-1.9 by
- Consistently place function annotation at the beginning char CALLER_OWN * doesn't make a whole lot of sense.
- 3:26 AM Changeset [c266281]release-1.10release-1.8release-1.9 by
- Remove owl_list altogether All uses have been removed.
- 3:26 AM Changeset [ce68f23]release-1.10release-1.8release-1.9 by
- Make owl_dict_get_keys return a GPtrArray Almost all the remaining uses of owl_list are tightly coupled into this one giant blob.
- 3:26 AM Changeset [3cdd6d2]release-1.10release-1.8release-1.9 by
- Add owl_ptr_array_free convenience function Unfortunately, most uses of GPtrArray here require a two-step chant which is really annoying. Until we require glib 2.22 and get g_ptr_array_new_with_free_func, use this helper function.
- 3:26 AM Changeset [e4524da]release-1.10release-1.8release-1.9 by
- Make aimsearch code use GPtrArray instead of owl_list
- 3:26 AM Changeset [ecffae6]release-1.10release-1.8release-1.9 by
- Make owl_zephyr_get_anyone_list return a GPtrArray
- 3:26 AM Changeset [e6d7e4e]release-1.10release-1.8release-1.9 by
- Replace the puntlist with an GPtrArray
- 3:26 AM Changeset [eb897c6]release-1.10release-1.8release-1.9 by
- Replace owl_errqueue's owl_list with a GPtrArray
- 3:26 AM Changeset [7ed9bc6]release-1.10release-1.8release-1.9 by
- Replace owl_zbuddlist's owl_list with GPtrArray
- 3:26 AM Changeset [d191f45]release-1.10release-1.8release-1.9 by
- Make owl_buddylist use a GPtrArray directly
- 3:26 AM Changeset [e4d7cb6]release-1.10release-1.8release-1.9 by
- Replace owl_keymap's list with a GPtrArray
- 3:26 AM Changeset [f9df2f0]release-1.10release-1.8release-1.9 by
- Replace owl_message's owl_list with a GPtrArray
- 3:26 AM Changeset [fc8a87a]release-1.10release-1.8release-1.9 by
- Replace owl_messagelist's internal owl_list with GPtrArray
- 3:26 AM Changeset [12294d2]release-1.10release-1.8release-1.9 by
- Remove owl_list from owl_zwrite Use a GPtrArray directly.
- 3:26 AM Changeset [6829afc]release-1.10release-1.8release-1.9 by
- Define CALLER_OWN macro Replace our exising uses of G_GNUC_WARN_UNUSED_RESULT with it. The old macro is just way too long. This also more clearly specifies the intent.
- 3:24 AM Changeset [95b52d1]release-1.10release-1.8release-1.9 by
- history: Store history in a GQueue Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:24 AM Changeset [8e515f9]release-1.10release-1.8release-1.9 by
- history: Do not deduplicate a partial entry This fixes a bug that let you to remove the last item from your history by typing it again, pressing up and down, and erasing it. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:24 AM Changeset [b470451]release-1.10release-1.8release-1.9 by
- history: Tell owl_history_store whether the new entry will be partial Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:24 AM Changeset [ad37b39]release-1.10release-1.8release-1.9 by
- history: Remove partial entries in owl_history_reset Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:24 AM Changeset [83a079a]release-1.10release-1.8release-1.9 by
- history: Make owl_history_store also reset It doesn’t make sense to run owl_history_store without owl_history_reset (except in one case where we know the current position is already the beginning and we’re about to owl_history_set_partial), so let’s merge these functions. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:24 AM Changeset [9923144]release-1.10release-1.8release-1.9 by
- history: Get rid of touched and associated bug This fixes the following bug: type a partial line, up, down, type the rest of the line, up, down; oops, we’re back to the first partial line. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:24 AM Changeset [43744ce]release-1.10release-1.8release-1.9 by
- history: Remove unused repeats flag Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 2:29 AM Changeset [1c01cdf7] by
- Merge 2bc6bb1631398bd9cd2eaeee9ed91c2a15649b30 into 8b293ea82bfdae7cddf0e0665ef6eca1cc0df04d
- 2:28 AM Changeset [2bc6bb16] by
- history: Store history in a GQueue Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 2:23 AM Changeset [32c331d] by
- history: Do not deduplicate a partial entry This fixes a bug that let you to remove the last item from your history by typing it again, pressing up and down, and erasing it. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 2:23 AM Changeset [7c80ea42] by
- history: Tell owl_history_store whether the new entry will be partial Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 2:22 AM Changeset [35849fe] by
- history: Remove partial entries in owl_history_reset Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 2:15 AM Changeset [413c910] by
- Consistently use BarnOwl or barnowl BarnOwl refers to the program, barnowl is the executable and any other identifiers that are conventionally lowercase.
- 2:12 AM Changeset [57a66fe] by
- history: Make owl_history_store also reset It doesn’t make sense to run owl_history_store without owl_history_reset (except in one case where we know the current position is already the beginning and we’re about to owl_history_set_partial), so let’s merge these functions. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Jun 24, 2011:
- 11:55 AM Changeset [8b293ea]release-1.10release-1.8release-1.9 by
- Use glib spawn functions when launching a newmsgproc The glib version is smaller and has the advantage of not leaking all our file descriptors to the process. More importantly, it does not call malloc between fork and exec which is not safe in the presence of threads.
Jun 23, 2011:
- 10:48 PM Changeset [e458b63] by
- Remove extra spaces round parentheses. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 10:47 PM Changeset [4839f5a] by
- Rename zsig to permalink. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 10:44 PM Changeset [525dd8d] by
- Refine module setup process. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 10:27 PM Changeset [3d304b9] by
- Fix bug with removed get_topic comment. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
Jun 22, 2011:
- 10:13 PM Changeset [26217b9] by
- Merge 2f6c2631acd6ec448d45e80dea7f3b2da7cc3f7c into b343c2c1248ccfcd8b514c26f4c896c1ec41888b
- 9:56 PM Changeset [2f6c263] by
- Improve docs, error handling and refactor. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [2c4c4c4] by
- Make topic detection more robust. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [68fa539] by
- Add autocomplete and wall-posting support. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [348cffc] by
- Suppress failed URL fetch errors. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [f134488] by
- Replace punctuation with spaces, and spaces to dashes, on rnjacob's suggestion. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [43d8a1e] by
- Note about async Facebook::Graph. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [6dccccf] by
- Suppress interest groups for now. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [303dbc1] by
- Add alternate implementation of keywords. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [6c3d4ad] by
- Rename postid to post_id. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [f4d1717] by
- Implement automatic instance selection, with no de-dup. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [2c8852a] by
- Add facebook-poll command and be more consistent about poll invoke. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [33a8d77] by
- Poll after comment. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [06bd0d1] by
- Make filters act more like traditional Zephyr filters. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [c323405] by
- Comment reading support and back-timing. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 9:56 PM Changeset [51ff997] by
- Initial commit of Facebook module implementation. This module was inspired by Kevin Riggle's Facebook-hacked-onto-Twitter implementation, but was rewritten to stand alone as its own module and use the new Facebook Graph API. It requires the Facebook::Graph CPAN module. Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
- 3:45 PM Changeset [fc625fb] by
- Merge 6376af1d0990d3324261fd650a8d36af1195eacf into b343c2c1248ccfcd8b514c26f4c896c1ec41888b
- 3:43 PM Changeset [b343c2c]release-1.10release-1.8release-1.9 by
- _dirty_everything: Avoid argument-dropping function pointer cast Fixes “WARNING: While resolving call to function '_dirty_everything' arguments were dropped!” when building with clang LTO. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:40 PM Changeset [d427f08]release-1.10release-1.8release-1.9 by
- Use G_GNUC_WARN_UNUSED_RESULT Have gcc warn us when we ignore the result of a function that requires the caller to free the result, or an initilization function that can fail. This might help (slightly) with preventing leaks and segfaults. Additionally changed some functions that should never fail to not return values. (The owl_list_* functions changed only fail if list->size < 0, which we assume is not the case elsewhere.)
- 3:36 AM Changeset [7086a20] by
- history: Get rid of touched and associated bug This fixes the following bug: type a partial line, up, down, type the rest of the line, up, down; oops, we’re back to the first partial line. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 3:07 AM Changeset [87ab6e5] by
- history: Remove unused repeats flag Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 12:37 AM Changeset [84a071f]release-1.10release-1.8release-1.9 by
- Remove global main_context variable It's really not necessary. We can pass NULL to g_main_loop_new to use the default context, and we don't reference the variable anywhere else.
- 12:37 AM Changeset [e146cd7]release-1.10release-1.8release-1.9 by
- Remove all uses of G_IO_PRI Any use of G_IO_PRI (and correspondingly OWL_IO_EXCEPT) is likely a bug as it's not really used for anything useful. The main use case is TCP out-of-band data which really isn't used by anyone. Reported-by: Anders Kaseorg <andersk@mit.edu>
- 12:37 AM Changeset [aa69c1e]release-1.10release-1.8release-1.9 by
- And finally, remove owl_io_dispatch All uses have been replaced with a GIOChannel watch.
- 12:37 AM Changeset [2d04312]release-1.10release-1.8release-1.9 by
- Use g_io_add_watch in zephyr initialization Which removes the final use of owl_io_dispatch.
- 12:37 AM Changeset [a6a9ddb]release-1.10release-1.8release-1.9 by
- Replace popexec's io_dispatch with a glib io watch Again, this code may be simplified with a GIOChannel.
- 12:37 AM Changeset [2244836]release-1.10release-1.8release-1.9 by
- Use g_io_add_watch in the stderr redirect We may actually be able to put GIOChannel to good use here with g_io_channel_read_line.
- 12:37 AM Changeset [bbb7876]release-1.10release-1.8release-1.9 by
- Replace the stdin reader with a GIOChannel watch We ignore the channel itself as ncurses expects to do its own thing.
- 12:37 AM Changeset [bcde7926]release-1.10release-1.8release-1.9 by
- Reimplement BarnOwl::add_io_dispatch with AnyEvent We can emulate the interesting semantics with perl. The one difference is that perl code can now register an IO dispatch on file descriptors C code was interested in. This isn't a big deal was Glib can handle multiple watches on the same FD. Granted, more than one reader on an FD would cause trouble, but there was nothing stopping perl code from reading from an FD we cared about anyway. AnyEvent also does not support select's exceptfd, so this is a slight behavior change, but probably an uninteresting one.
- 12:37 AM Changeset [074bdaa]release-1.10release-1.8release-1.9 by
- Replace BarnOwl::Timer with a perl wrapper over AnyEvent This also allows us to kill owl_timer altogether.
- 12:37 AM Changeset [58f4fb2]release-1.10release-1.8release-1.9 by
- Drop show timers feature It was useful to access programmatically and probably not hugely useful. We can restore something like it later if it's really needed.
- 12:37 AM Changeset [72146c7]release-1.10release-1.8release-1.9 by
- Convert pseudologins timer to glib timers
- 12:37 AM Changeset [6b0b4f4]release-1.10release-1.8release-1.9 by
- Convert AIM timers to glib timers We do lose the timer tracking feature, but I think that's fine. Glib does have some main loop debug spew to run, though admittedly it may require a custom-built glib. Glib 2.14 allows us to use g_timeout_add_seconds which synchronizes wakeups at the seconds granularity to minimize CPU wakeups.
- 12:37 AM Changeset [4f746f8]release-1.10release-1.8release-1.9 by
- Bump required glib version to 2.16 Debian Lenny's version is 2.16.6-3 and Ubuntu Hardy's is 2.16.6-0ubuntu1.2. Also remove the version check in main; it never did anything useful as GLIB_CHECK_VERSION is evaluated at compile-time.
- 12:37 AM Changeset [9179fd7]release-1.10release-1.8release-1.9 by
- Use AnyEvent's Glib backend
Jun 21, 2011:
- 11:19 PM Changeset [12505e3] by
- Merge f0d5ef52c48abd4954c21397e5fba9605d8f713f into 937a00e96102f86412b6844575901e57be238546
- 11:19 PM Changeset [f0d5ef5] by
- Remove global main_context variable It's really not necessary. We can pass NULL to g_main_loop_new to use the default context, and we don't reference the variable anywhere else.
- 11:19 PM Changeset [c66ec48] by
- Remove all uses of G_IO_PRI Any use of G_IO_PRI (and correspondingly OWL_IO_EXCEPT) is likely a bug as it's not really used for anything useful. The main use case is TCP out-of-band data which really isn't used by anyone. Reported-by: Anders Kaseorg <andersk@mit.edu>
- 11:19 PM Changeset [c5c5686] by
- And finally, remove owl_io_dispatch All uses have been replaced with a GIOChannel watch.
- 11:19 PM Changeset [b15f9e9] by
- Use g_io_add_watch in zephyr initialization Which removes the final use of owl_io_dispatch.
- 11:19 PM Changeset [b37accd] by
- Replace popexec's io_dispatch with a glib io watch Again, this code may be simplified with a GIOChannel.
- 11:19 PM Changeset [bdc53e0] by
- Use g_io_add_watch in the stderr redirect We may actually be able to put GIOChannel to good use here with g_io_channel_read_line.
- 11:19 PM Changeset [4da7659] by
- Replace the stdin reader with a GIOChannel watch We ignore the channel itself as ncurses expects to do its own thing.
- 11:19 PM Changeset [f21bc36] by
- Reimplement BarnOwl::add_io_dispatch with AnyEvent We can emulate the interesting semantics with perl. The one difference is that perl code can now register an IO dispatch on file descriptors C code was interested in. This isn't a big deal was Glib can handle multiple watches on the same FD. Granted, more than one reader on an FD would cause trouble, but there was nothing stopping perl code from reading from an FD we cared about anyway. AnyEvent also does not support select's exceptfd, so this is a slight behavior change, but probably an uninteresting one.
- 4:09 AM Changeset [c474a97] by
- _dirty_everything: Avoid argument-dropping function pointer cast Fixes “WARNING: While resolving call to function '_dirty_everything' arguments were dropped!” when building with clang LTO. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Jun 20, 2011:
- 10:26 PM Ticket #182 (update zcrypt man page to mention AES) created by
- The zcrypt man page should document the AES keyfile format. Once done, …
Jun 19, 2011:
- 10:24 PM Changeset [937a00e9]release-1.10release-1.8release-1.9 by
- Don't leak timestr when setting time in a perl message Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
- 4:40 AM Changeset [b0e6560] by
- Merge 7dfe886e75427ed8ba1ce9cc7e170bf1abd16b2c into 9d43dcc114c45fb1d94dec67eb38456bded0dc0d
- 2:44 AM Changeset [7dfe886] by
- Use G_GNUC_WARN_UNUSED_RESULT Have gcc warn us when we ignore the result of a function that requires the caller to free the result, or an initilization function that can fail. This might help (slightly) with preventing leaks and segfaults. Additionally changed some functions that should never fail to not return values. (The owl_list_* functions changed only fail if list->size < 0, which we assume is not the case elsewhere.)
- 1:49 AM Changeset [9d43dcc]release-1.10release-1.8release-1.9 by
- Build with -Wwrite-strings Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:49 AM Changeset [4e37d56]release-1.10release-1.8release-1.9 by
- owl_dict_regtest: Copy and free dict values Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:49 AM Changeset [9efc154]release-1.10release-1.8release-1.9 by
- variables_to_init: Copy string literals This squashes the rest of the -Wwrite-strings warnings from temporarily storing string literals in char * fields. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:49 AM Changeset [9e86f6f]release-1.10release-1.8release-1.9 by
- variables_to_init: Move into new function owl_variable_add_defaults Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:49 AM Changeset [117c21c]release-1.10release-1.8release-1.9 by
- commands_to_init: Copy string literals This squashes a bunch of -Wwrite-strings warnings from temporarily storing string literals in char * fields. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:49 AM Changeset [aad166a]release-1.10release-1.8release-1.9 by
- commands_to_init: Move into new function owl_cmd_add_defaults Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:49 AM Changeset [ea68035]release-1.10release-1.8release-1.9 by
- Copy and free pval_default for OWL_VARIABLE_STRING variables Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:12 AM Changeset [fcc0936] by
- Merge 4798b3653fae047b4c94e9ea07237195446b2991 into fe73d0c8bf42966a7f576c0ee9158753d7685592
- 1:08 AM Changeset [4798b36] by
- Build with -Wwrite-strings Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:08 AM Changeset [81a5686] by
- variables_to_init: Copy string literals This squashes the rest of the -Wwrite-strings warnings from temporarily storing string literals in char * fields. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:08 AM Changeset [3756803] by
- variables_to_init: Move into new function owl_variable_add_defaults Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:08 AM Changeset [df7301c] by
- commands_to_init: Copy string literals This squashes a bunch of -Wwrite-strings warnings from temporarily storing string literals in char * fields. Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:08 AM Changeset [d4c3284] by
- commands_to_init: Move into new function owl_cmd_add_defaults Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:08 AM Changeset [44dd092] by
- Copy and free owl_variable.pval_default Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 1:07 AM Changeset [24a791f]release-1.10release-1.8release-1.9 by
- Make owl_variable.validsettings const char * Signed-off-by: Anders Kaseorg <andersk@mit.edu>
- 12:07 AM Changeset [fe73d0c]release-1.10release-1.8release-1.9 by
- Just require stdbool.h and tell ncurses to use it Now that Solaris' stdbool.h works for us, we may as well just require it. The preamble is repetitive and didn't actually work anyway. (It conflicts with ncurses' attempts to redefine bool when stdbool.h is unavailable or disabled.) We may need to add a different preamble later if we care about including these headers in C++ (Solaris has a C++-incompatible stdbool.h), but we can deal with that later.
- 12:07 AM Changeset [d1d68e0]release-1.10release-1.8release-1.9 by
- Build with C99 This allows (and even requires) us to use -D_XOPEN_SOURCE=600 on Solaris. It also makes the Solaris stdbool.h actually work.
- 12:07 AM Changeset [4f5e38f]release-1.10release-1.8release-1.9 by
- Properly discover things when /usr/athena != /usr On Solaris, by an accident of configure and krb5-config, we manage to discover libzephyr and libcom_err, but not com_err.h. Thankfully the latter is not fatal and we relied on C's defaulting everything to int. And by accident we were searching for libzephyr, and not zephyr.h. Also use CPPFLAGS instead of CFLAGS to pull in our bundled header files, otherwise autoconf warns about a discrepancy between the preprocessor and compiler.
- 12:07 AM Changeset [b14f8cb]release-1.10release-1.8release-1.9 by
- Make the barnowl shell script work in Solaris Apparently their shell is lame. In case someone wanted to run this thing on Solaris or something absurd like that.
- 12:04 AM Changeset [a006d475] by
- Merge 28da2daf4548256b44d1fd586200032e96462d57 into e93dd785a2e76aa0dc14ecd56fd2c61b3598bc96
Jun 18, 2011:
- 11:56 PM Ticket #143 (jwrite fails on jids including a dash (-)) closed by
- fixed
- 11:52 PM Ticket #181 (Display jabber names (not just jids)) created by
- Currently, only jids are displayed on messages and notifications. We …
- 11:04 PM Ticket #172 (These tickets should go somewhere) closed by
- fixed
- 5:17 PM Ticket #149 (Net::IRC is abandoned) closed by
- fixed: Fixed in 1753ea0efc7c6af1bbd2888e6138421dbb939fad. Using AnyEvent::IRC now.
- 5:12 PM Changeset [0d3c100] by
- Merge e93dd785a2e76aa0dc14ecd56fd2c61b3598bc96 into 5b197f71370f5a5b3c3c09935c5679d6c90fa4c2
- 5:09 PM Changeset [e93dd78]release-1.10release-1.8release-1.9 by
- Properly tear down the ncurses screen in tester.c There's actually a set of valgrind suppressions in ncurses, and there really isn't API to clean up after initscr. But since we allocate this SCREEN ourselves, may as well clean it up.
- 5:07 PM Changeset [f0781ba]release-1.10release-1.8release-1.9 by
- Release reference to GMainLoop when done It's only done at shutdown, but we may as well appease valgrind.
- 4:39 PM Changeset [596c8b10]release-1.10release-1.8release-1.9 by
- Don't leak string data in owl_util_regtest
- 2:57 PM Changeset [a9237aa]release-1.10release-1.8release-1.9 by
- Don't specify both G_VOID and G_SCALAR Turns out G_SCALAR is 0, so it doesn't really matter, but we may as well say what we mean.
Note: See TracTimeline
for information about the timeline view.